I have a weird "Formicarium" design- need help!

Show us your formicariums and ant setup, ask formicarium-related questions, or share your experiences with building an ant home. Here you will also find formicarium requirements for specific ant species.

Moderator: ooper01

Post Reply
MaxWilldernessKids
Posts: 8
Joined: Wed Jan 02, 2019 3:12 pm

I have a weird "Formicarium" design- need help!

Post: # 55100Post MaxWilldernessKids
Thu Jan 03, 2019 10:46 pm

I am a new ant keeper trying to raise a black crazy ant colony (Paretrachina Longicornis). Right now they are still in a test tube+ small outworld setup, but eventually I will have to give them a real formicarium. I need something secure and escape-proof, easy to maintain, and AntsCanada quality while still under $50 USD. So I had an idea. I could buy the AC deluxe test tube pack, which comes with 5 test tubes and plenty of adapters, an AC test tube portal, and some large vinyl tubing. I would stick 3 of the test tubes into the portal, and in the last hole I would stick a tube leading to an outworld. Do you think this setup would work? And would all of the connections and ports fit and connect? Any advice is appreciated, thanks! :)
Keeping/Founding : Paratrechina Longicornis x1

IndoAnts
Posts: 10
Joined: Sat Jun 30, 2018 8:05 am
Location: Indonesia

Re: I have a weird "Formicarium" design- need help!

Post: # 55101Post IndoAnts
Fri Jan 04, 2019 6:48 am

It should be alright for the ants. Try to also add a bit of substrate around the middle of the test tube portal. The only problem about this setup is maintaining the humidity within the nest. This is because the water in the test tubes will slowly dry out and the ants might even transfer their nest in the outworld which you really dont want, especially if the ants are paratrechina longecornis as this species is very mobile and would relocate if conditions are unfavourable. Another reason from my experience with paratrechina longecornis is that they very like humid nests. If this is your only option for a formicarium, the only way i could think of for hydrating this formicarium is by either moving all the ants and brood out of the dried out testtube by shining it with bright light and then quickly changing the test tube with a new test tube setup. I must say that this is not very practical. I would suggest you make a formicarium out of ytong, known by other names as hebel or air concrete. You could usually find this in home depots. Other materials i find safe and great for ants are cork or plaster of paris. All the materials stated have been used by me and are great.

Sorry for the long reply

MaxWilldernessKids
Posts: 8
Joined: Wed Jan 02, 2019 3:12 pm

Re: I have a weird "Formicarium" design- need help!

Post: # 55102Post MaxWilldernessKids
Fri Jan 04, 2019 10:33 am

Thanks for the advice! I might have to edit my plans. :D
Keeping/Founding : Paratrechina Longicornis x1

MaxWilldernessKids
Posts: 8
Joined: Wed Jan 02, 2019 3:12 pm

Re: I have a weird "Formicarium" design- need help!

Post: # 55103Post MaxWilldernessKids
Fri Jan 04, 2019 12:48 pm

Ok, so this is my new plan. I have a 10 gallon aquarium that I can use as the outworld. And I came up with a new idea for the formicarium. I will attach two water bottles with a T connector and and use the third opening as the nest exit. inside one of the water bottle, on one side there will be moist cotton balls for a humidity gradient. Here is a blueprint I made to show you guys:https://imgur.com/a/ZmTOM8a

Any new advice on this idea? Again, all help is appreciated! :D
Keeping/Founding : Paratrechina Longicornis x1

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests